2
a Remove the protective tape and film covering
the machine, and also from the LCD.
b Remove the orange protective part a by lifting
the front of the machine and then pulling down
on the packing part.
c Remove the plastic bag b containing the ink
cartridges from on top of the paper tray.
d Make sure you have all the components.
e Open the scanner cover, insert the Disc Tray
into the storage space on the right side of the
scanner cover, and then close the scanner
cover.
2
Load plain A4 paper
a Pull the paper tray a completely out of the
machine.
b Open the output paper tray cover a.
When using the Disc Print feature make sure that
there is over 10 cm of free space behind the
machine.
1
1
1
To Next Page
Loading...
