Home > Fax > Voice Operations and Fax Numbers > Set up Groups for Broadcasting > Add or Delete a
Broadcasting Group Member
Add or Delete a Broadcasting Group Member
Related Models: MFC-T910DW
1. Press (Address Book).
2. Press a or b to select the following:
a. Select [Change]. Press OK.
b. Select the Group you want to change. Press OK.
c. Select [Add/Delete]. Press OK.
d. Select [Alphabetical Order] or [Numerical Order]. Press OK.
3. Do one of the following:
• To add a member using his Speed Dial number, press a or b to select the Speed Dial number, and then
press d or c to select the check box labelled with the Group name.
• To delete a member using his Speed Dial number, press a or b to select the Speed Dial number, and then
press d or c to remove the check box labelled with the Group name.
Repeat this step until you have added or deleted all the fax numbers you want.
4. Press OK.
5. Select [OK] and then press OK.
6. Press Stop/Exit.
Related Information
• Set up Groups for Broadcasting
213
To Next Page
Loading...
