Home > Security > Lock the Machine Settings > About Using TX Lock > Change the TX Lock Password
Change the TX Lock Password
Related Models: MFC-T910DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Fax]. Press OK.
b. Select [Miscellaneous]. Press OK.
c. Select [TX Lock]. Press OK.
d. Select [Set Password]. Press OK.
3. Enter the four-digit number of the current password. Press OK.
4. Enter a four-digit number for the new password. Press OK.
5. Re-enter the new password. Press OK.
6. Press Stop/Exit.
Related Information
• About Using TX Lock
312
To Next Page
Loading...
