Home > Troubleshooting > If You Are Having Difficulty with Your Machine > Telephone and Fax
problems > Set Dial Tone Detection
Set Dial Tone Detection
Related Models: MFC-T910DW
Setting the Dial Tone to [Detection] will shorten the Dial Tone detect pause.
1. Press Settings.
2. Press a or b to select the following:
a. Select [Initial Setup]. Press OK.
b. Select [Dial Tone]. Press OK.
c. Select [Detection] or [No Detection]. Press OK.
3. Press Stop/Exit.
Related Information
• Telephone and Fax problems
421
To Next Page
Loading...
