Brother DCP-T310 - Page 501

Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features
Tables > Settings Tables (1 Line LCD)
Settings Tables (1 Line LCD)
Related Models: DCP-T310/DCP-T510W/DCP-T710W
These tables will help you understand your machine's menu selections and options.
Menu > [Maintenance]
Level 1
Level 2 Descriptions
ImproveQuality
- Check and correct the print quality, alignment and paper feeding according
to the LCD instructions.
Cleaning
- Clean the print head according to the LCD instructions.
InkBottleModel
- Check the ink bottle numbers.
Print Setting ReduceSmudging
Reduce smudging on the paper or paper jams during printing.
Slow Drying
Use this setting when printing with a type of plain paper on which the ink
dries very slowly.
Ink Low Notice
- Set the machine to display the ink low messages.
Menu > [General Setup]
Level 1
Level 2 Descriptions
Tray Setting
(DCP-T510W/
DCP-T710W)
Paper Type
Set the type of paper in the paper tray.
Paper Size
Set the size of paper in the paper tray.
Check Paper
Check the paper type and paper size when you pull the tray out of the
machine.
Ecology Sleep Mode
Select how long the machine must be idle before it goes into Sleep
Mode.
Quiet Mode
Decrease printing noise.
Auto Power
Off
Select how long the machine must wait before it automatically turns
itself off after entering Sleep Mode.
When set to Off, the machine will not power off automatically.
LCD Contrast
- Adjusts the contrast of the LCD.
Menu > [Copy]
Level 1
Descriptions
Density
Adjust the density.
Quality
Select the Copy resolution for your document type.
Menu > [Network] (DCP-T510W/DCP-T710W)
Level 1
Level 2 Level 3 Descriptions
WLAN TCP/IP BOOT Method
Select the Boot method that best suits your needs.
IP Address
Enter the IP address.
Subnet Mask
Enter the Subnet mask.
Gateway
Enter the Gateway address.
Node Name
Enter the Node name.
495