5. Power On/Off
Press to turn the machine on.
Press and hold
to turn the machine off. The LCD displays [Shutting Down] and stays on for a few
seconds before turning itself off.
If you turn the machine off using , it will still clean the print head periodically to maintain print quality. To
prolong print head life, provide better ink efficiency, and maintain print quality, keep your machine connected
to a power source at all times.
6. Start Buttons
Mono Start
• Press to start making copies in monochrome.
• Press to start scanning documents (in colour or monochrome, depending on the scan setting).
Colour Start
• Press to start making copies in full colour.
• Press to start scanning documents (in colour or monochrome, depending on the scan setting).
7.
SCAN
Press to switch the machine to Scan mode.
8. WiFi
Press to configure the wireless settings while the machine is idle.
9. Copy Buttons
• Enlarge/Reduce
Press to enlarge or reduce copies.
• Copy Quality
Press to temporarily change the quality of your copies.
• Copy / Scan Options
Press to access temporary settings for copying or scanning.
Related Information
• Introduction to Your Machine
10
To Next Page
Loading...
