Home > Routine Maintenance > Refill the Ink Tanks
Refill the Ink Tanks
Make sure to confirm the actual amount of remaining ink visually by looking through the window (1) of the ink
tank. If the remaining ink level is at or below the lower line (2) under the minimum fill mark, refill the ink tank.
The ink below the lower line is necessary to prevent air from drying out and damaging the print head assembly.
Refill the ink tank when the remaining ink level is at or below the lower line.
CAUTION
If ink gets into your eyes, rinse them with water immediately. If left as it is, it may cause red eye or mild
inflammation. In case of any abnormality, consult your doctor.
IMPORTANT
• Brother strongly recommends that you continue to use only Brother Original replacement ink designed for
your model. Use or attempted use of potentially incompatible ink in the Brother machine may cause
damage to the machine and/or may result in unsatisfactory print quality. Our warranty coverage does not
apply to any problem that is caused by the use of unauthorised third-party ink. To protect your investment
and obtain premium performance from the Brother machine, we strongly recommend the use of Brother
Original ink.
• Check the ink bottle model name on the label. Using the incorrect ink may cause damage to the machine.
BTD60BK
BT5000CMY
BT5001CMY
BT5009CMY
BT6000BK
BT6001BK
BT6009BK
1. Open the ink tank cover (1).
399
To Next Page
Loading...
Need help?
General
