Why is the thread breaking on my Brother Sewing Machine?
Thread breakage can occur due to several reasons. Make sure the needle is correctly installed and the machine is properly threaded. High thread tension could also be the culprit, so check and adjust it as needed. Damage to the looper, needle plate, needle, or needle guard can also cause thread breakage; if any of these parts are damaged, try to fix them with sandpaper or buffing.
What to do if my Brother FB-N310 Sewing Machine needle breaks?
If the needle breaks, make sure you are using a needle and thread that are appropriate for the material you are sewing. Also, check that the needle is installed correctly and that the installation positions of the needle, under looper, and over looper are correct.
Why does my Brother Sewing Machine skip stitches?
Skipping stitches can occur for several reasons. Check the installation positions of the needle, under looper, and over looper. Ensure that the thread tension and threading are correct. Also, check for low thread tension in the double chain stitch looper. If the looper tip is damaged or blunt, correct it with sandpaper or install a new looper.
What to do if seams are not consistent on my Brother FB-N310 Sewing Machine?
Inconsistent seams can result from several factors. Start by checking and cleaning the thread path if you notice inconsistent thread tension. Low thread tension or a blunt needle tip can also cause this issue; replace the needle if it's blunt. Also, check for low presser foot pressure and the feed dog height.
Why does my Brother Sewing Machine cause wrinkles?
Wrinkles can appear due to a few reasons. Ensure you are using a needle and thread that match the material. High thread tension can cause wrinkling, so check and adjust it. Also, check for high presser foot pressure, the feed dog height, and the differential feed amount.
What to do if double chain stitching is not possible on my Brother FB-N310?
If double chain stitching is not working, check the threading. Also, check the needle and looper thread tension, the main feed dog height, the presser foot position, and the double chain stitch looper installation.
What to do if the knives cut poorly on my Brother Sewing Machine?
If the knives are not cutting well, check the upper/lower knife overlap and the upper/lower knife installation. Also, check for wear on the upper and lower knives.
General| Brand | Brother |
|---|---|
| Model | FB-N310 |
| Category | Sewing Machine |
| Language | English |
To Next Page
