12
Pull out the cleaning liquid tank from the side of the printer;
enough to open the lid of the tank and fill the tank with the
cleaning solution until reaching the "FULL" line.
When filling is completed, close the lid and slowly push the
cleaning liquid tank back inside the printer for storage.
IMPORTANT
When you pour the cleaning solution, be sure
not to exceed the "FULL" line.
TIPS
After filling the cleaning solution, make sure to
push the cleaning liquid tank in to the end. The
cleaning liquid tank that is not properly inserted
causes an error and disables printing.
Install the ink pouches into cartridges by referring to the
illustrations on the label located on the ink bay cover of the
machine.
TIPS
If you are not using white ink and using only
color inks for printing, install a maintenance
solution pouch instead of a white ink pouch,
referring to the procedures from step 2.
1.
Since there is a component within the white ink which becomes
deposited, please be sure to shake the ink pouch before it is
taken out of the box.
Hold each edge of the carton containing the pouch tightly and
shake it 100 times from side to side.
Next, turn it upside down and shake it 100 times.
2.
FULL
LOW
X0025
Filling the cleaning solution
3
X0016
Ink cartridge setup and installation
4
To Next Page
Loading...
