18
Attach the clip to the tip of the tube on the tank unit side and
insert it into the cleaning liquid tank.
Pinch the tube with a clip to prevent it from coming off.
IMPORTANT
Completely connect the tube to prevent it from
coming off.
Close the cover of the machine and insert the AC power cord
into (a) and the outlet.
Press the power button (b) to turn the printer power ON.
TIPS
Error messages "Perform Initial Ink Installation"
and “Please Refill Ink” may be displayed on the
screen of the printer but it will be no problem, so
please continue to perform the ink installation
according to the procedures described in this
manual.
X0430
(b)
(a)
X0364
Turning on the power
5
Cleaning liquid tank
4
To Next Page
Loading...
