Brother GTX pro Bulk - Page 32

21
Setu
p
of the
p
rinte
r
1.
Press on the operation panel to move the platen to the
front.
2.
Rotate the platen height adjustment lever in direction a, and
align the scale to position "A".
3.
Insert the platen in direction s and tighten the platen fixing
lever in direction d.
TIPS
Use with the knob (a) tightened when printing.
Depending on the height of the platen, the
platen fixing lever may strike against the platen,
and prevent rotation. In that case, move the
platen fixing lever in the direction (b), draw the
edge of the platen fixing lever forward as shown
in (c), then loosen it again.
X0374
Mounting the platen
8
X0288
①
X0428
②
③
(a)
(b)
(c)