Brother GTX pro Bulk - Configuring language and ink installation

22
Perform this operation while the printer is in Standby mode.
1) -> [Language] -> Select your language ->
2) Press the power button to turn off the power.
Turn on the power of the printer and perform the operation
while the printer is in Standby mode.
1) -> [Maintenance] -> [Initial Ink Installation] -> [All
Print Heads]
2) Follow the precautions on the screen and press (it
takes about 90 minutes and further takes about 30
minutes if below 18°C).
3) When the printer returns to Standby mode, the operation
will be completed.
Configuring the language
9
Installing the ink
10