Environmental Condition Requirements
Environment for: Required Temperature Required Humidity
Keeping yourprinter
0°C (32°F) to 40°C(104°F)
20% to 85%
(no condensation)
Operating yourprinter
10°C (50°F) to 35°C(95°F)
18°C (64.4°F) to 30°C(86°F)
35% to 85%
(no condensation)
• The following environmental requirements should bemet:
• If these temperature conditions can not be met, air conditioning or heating will be needed.
• GTX600 has a built-in humidifier to help control ambient environment. If a water source can not be provided you may need an evaporative
humidifier for the room size. Do not use a humidifier that creates mist as it can damage the electrical components of the printer.
• If conditions onsite are to ever exceed or drop below “optimal printing conditions” then it must be understood that the printer may have
issues with operation.
• When the temperatureis below the “optimal” range, the printer will take longer to print.
• When above the “optimal” range it can start to cause issues with print quality in the form of banding, or missing nozzles when printing.
• If excessively high, it may cause the ink supply parts to become damaged as a result of ink drying inside of them.
• Even if the printer is to be stored, the conditions for “Keeping your printer” must still bemet. Contact Brother support prior storing machine by
creating a ticket at https://productiondtg.com/support.
I understand that the printer will need to be placed in an area that can meet the environmental
conditions mentioned above and that if not operated inside of the specified conditions this may cause
issues with printing, or the printer.
To Next Page
Loading...
