Brother GTX600 - Electrical Requirements

Electrical Requirements
• Ensure that the proper electrical capacity is present and available for use.
• Ensure that the heat press is going to be put on its own dedicated circuits
that meet the power requirements as listed by the OEM. For example, there
are a few common items listed to the right.
• The heat press needs to be kept on its own dedicated breaker/circuit. If an
Air Fusion is purchased a compressor will also be needed and on dedicated
line.
• APretreatment machine can share an outlet as long as it has a low amperage
consumption such as a Schulze product.
• The GTX600 can not be hardwired and must require a plug. Plug is not
provided and must be available for installation tech.
• Brother provides a 6’ cord in the Starter Kit
• 24/7 power supply will be required
Electrical
Requirements
Power
Power
Consumptions
GTX600
Single-ph
ase
200 V; 240
V
50/60 Hz
5 Amp max
Schulze IV
Single-phas
e
120-240V,
50/60Hz
2Amp
MAXX2G120
Single
-phase
120V,
50/60Hz
15Amp
MAXX2G220
Three-pha
se
240V,
50/60Hz
15Amp
I understand that proper electrical will need to be provided and available for the equipment being purchased.The equipment will need
to be wired and ready for use before the time ofinstallation.