20
1.
Press to move the platen to the front.
2.
Apply a level to the center of the platen.
3.
Adjust the level by rotating the lower nuts that secure the legs
(4 points).
IMPORTANT
Adjust so that the adjusters protrude 4.9 in. (125
mm) or less from the bottom of the frame.
4.
Tighten the upper nut upwards after adjusting the level.
IMPORTANT
Check the level again after adjusting the legs.
4.9 in.
(125 mm)
or less
Adjusting the levelness
6
To Next Page
Loading...
