To Next Page
L
lgarciaAug 5, 2025
Why does the needle keep breaking on my Brother Sewing Machine?
- MmcolemanAug 5, 2025
The needle on your Brother Sewing Machine might be breaking due to several reasons: the needle may be incorrectly installed, so correctly install the needle. The needle clamp screw might be loose, so use the screwdriver to firmly tighten the screw. The needle could be bent or blunt, so replace the needle. The upper thread tension might be too tight, so loosen the upper thread tension. The spool may be incorrectly installed, so correctly install the spool. A bobbin not specifically designed for this machine might be in use, so only use a bobbin designed specifically for this machine. The upper thread may not have been threaded correctly, so correct the upper threading.
General
