Need help?Do you have a question about the Brother Homelock 1034D and is the answer not in the manual?
General| Type | Serger |
|---|---|
| Number of Threads | 3 or 4 |
| Maximum Sewing Speed | 1, 300 stitches per minute |
| Differential Feed | Yes |
| Free Arm | Yes |
| Color-Coded Threading | Yes |
| Warranty | 25-year limited warranty |
| Differential Feed Ratio | 0.7 to 2.0 |
| Stitch Length | 2.5mm to 4mm |
Explains symbols used in manual illustrations to denote part movements.
Adjusts the vertical position of the needle bar for proper stitch formation.
Sets the horizontal position of the lower looper relative to the needle and plate.
Synchronizes the lower looper's movement with the needle for correct stitch interloping.
Synchronizes the upper looper's movement with the needle and lower looper for stitch formation.
Sets the vertical height of the feed dog for standard sewing operations without differential feed.
Adjusts the feed dog height for differential feed sewing to control fabric stretch.
Synchronizes the feed dog movement with the needle for precise fabric feeding.
Sets the vertical position of the presser bar for optimal fabric feeding and stitch quality.
Adjusts thread tension levels for balanced and secure stitch formation.
Sets the vertical position of the main thread take-up lever for consistent thread delivery.
Adjusts the position of looper thread take-up levers for proper thread feeding.
Instructions for replacing the upper and lower cutting knives for sharp cutting.
Procedures for adjusting belt tension and replacing the timing belt.
Step-by-step guide to safely replace the sewing machine's light bulb.
To Next Page
