CHAPTER 6 NOVELL NETWARE PRINTING
6-17
The following steps apply to configuring a remote printer on NetWare 3.xx
systems:
6.
a. Select Print Server Information from the PCONSOLE main menu and
choose the name of the PSERVER NLM.
b. Select Print Server Configuration and then Printer Configuration. Select
any "Not Installed" printer and press Enter. Remember the number of
this printer, since it will be used later in the configuration process.
c. If desired, type in a new name for the printer.
d. Go to Type, press ENTER, highlight Remote Other/Unknown and press
ENTER again. The other settings in this menu are not required.
e. Push ESCAPE and save the changes.
f. Push ESCAPE and select Queues Serviced by Printer.
g. Highlight the printer name that you just configured and press ENTER.
h. Press INSERT, choose the desired print queue, and press ENTER (you
can accept the default priority).
i. Press ESCAPE several times to exit PCONSOLE.
To Next Page
Loading...
