Unpack the machine and check the components
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct
installation procedure.
NOTE:
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than 2 meters.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network.
Remove the packing materials and install the toner cartridge
Load paper in the paper tray
Connect the power cord and turn on the machine
A
Drum Unit
(Pre-installed)
USB Interface Cable Quick Setup Guide
B
Inbox Toner Cartridge CD‑ROM Product Safety Guide
A
B
B
A
A
B
3
2
1
Adjust the paper guides.
Back Front
Remove the orange part. Remove the orange part.
Quick Setup Guide
HL‑2560DN
The latest manuals are available at the Brother
Solutions Center: solutions.brother.com/manuals.
Version 0
CHN-ENG
To Next Page
