Brother HL-5270DN

4. Control Panel
67
Example of changing the menu setting
Setting IP Address
a Press the + or - button to choose NETWORK (and to display each setting shown below).
INFORMATION
h
NETWORK
b Press Set.
TCP/IP
c Press Set.
TCP/IP ENABLE
d Press the + button.
IP ADDRESS=
e Press Set.
The last digit in the first part of the number is blinking.
192. 0. 0. 192*
f Press the + or - button to increase or decrease the number.
Press Set to go to the next number.
123. 0. 0. 192*
g Repeat this process until you have set your IP address.
123. 45. 67. 89
h Press Set to finish the IP address.
An asterisk appears at the end of the LCD.
123. 45. 67. 89*