3
d Gently shake it from side to side several times
to distribute the toner evenly inside the
assembly.
e Put the drum unit and toner cartridge assembly
into the printer until it clicks into place.
f Close the front cover of the printer.
3
Load paper in the paper
tray
a Pull the paper tray completely out of the printer.
b While pressing the blue paper-guide release
lever a, slide the paper guides to fit the paper
size you are loading in the tray. Make sure that
the guides are firmly in the slots.
c Fan the stack of paper well to avoid paper jams
and misfeeds.
d Put paper in the tray, and make sure that the
paper is below the maximum paper mark a.
The side to be printed on must be face down.
e Put the paper tray firmly back in the printer.
Make sure that it is completely inserted into the
printer.
IMP
RTANT
Make sure the paper guides touch the sides of
the paper so it will feed properly.
1
1
1
1
To Next Page
Loading...
