Brother HL-L3210CW - How to Navigate the Touchscreen LCD

Home > Introduction to Your Brother Machine > How to Navigate the Touchscreen LCD
How to Navigate the Touchscreen LCD
Related Models: HL-L3270CDW
Press your finger on the LCD to operate it. To display and access all the options, press a or b on the LCD to
scroll through them.
The following steps explain how to navigate through changing the machine's setting. In this example, the LCD
Backlight setting is changed from [Light] to [Med]:
IMPORTANT
DO NOT press the LCD with a sharp object such as a pen or stylus. It may damage the machine.
NOTE
DO NOT touch the LCD immediately after plugging in the power cord or turning on the machine. Doing this
may cause an error.
1. Press [Settings] > [All Settings].
2. Press a or b to display the [General Setup] option, and then press [General Setup].
3. Press a or b to display the [LCD Settings] option, and then press [LCD Settings].
4. Press [Backlight].
15