Home > Paper Handling > Paper Settings > Change the Check Paper Size Setting
Change the Check Paper Size Setting
When you turn on your machine's Check Size setting, the machine displays a message when you remove a
paper tray, asking if you changed the paper size and paper type.
The default setting is On.
>> HL-L3210CW/HL-L3230CDW
>> HL-L3270CDW
HL-L3210CW/HL-L3230CDW
1. Press a or b to display the [General Setup] option, and then press OK.
2. Press a or b to select the [Tray Setting] option, and then press OK.
3. Press a or b to select the [Check Size] option, and then press OK.
4. Press a or b to select the [On] or [Off] option, and then press Go.
HL-L3270CDW
1. Press [Settings] > [All Settings] > [General Setup] > [Tray Setting] > [Check
Size].
2. Press [On] or [Off].
3. Press
.
Related Information
• Paper Settings
35
To Next Page
Loading...
