Brother HL-L3210CW - Reset the Machines Calibration Settings

Home > Routine Maintenance > Calibrate Colour Output > Reset the Machine's Calibration Settings
Reset the Machine's Calibration Settings
If the output colour differs from what you see on your monitor, try resetting your machine's calibration
parameters.
>> HL-L3210CW/HL-L3230CDW
>> HL-L3270CDW
HL-L3210CW/HL-L3230CDW
1. Press a or b to select the [Printer] option, and then press OK.
2. Press a or b to display the [ColourCorrection] option, and then press OK.
3. Press a or b to display the [Calibration] option, and then press OK.
4. Press a or b to display the [Reset] option, and then press OK.
5. Press a to select [Reset].
6. Press Cancel.
HL-L3270CDW
1. Press [Toner] > [Calibration] > [Reset].
2. Press [Yes].
3. Press .
Related Information
• Calibrate Colour Output
296