4. Press OK to select [Drum].
5. Select the toner colour for the drum unit you just replaced, and then press OK.
6. Select [Reset] to reset the drum counter.
Reset the Drum Counter (HL-L3270CDW)
1. Make sure the machine is turned on.
2. Press and hold for about five seconds.
3. Press [Drum].
4. Select the toner colour for the drum unit you just replaced.
5. Press [Yes].
Related Information
• Replace Supplies
Related Topics:
• Error and Maintenance Messages
• Improve the Print Quality
267
To Next Page
Loading...
