Brother HL-L3210CW - Page 322

Level 2 Level 3 Level 4 Description
HP LaserJet Right Margin
- Set the right margin at column 10 to 80
columns at 1 cpi.
Top Margin
- Set the top margin distance from the top edge
of the paper.
Bottom Margin
- Set the bottom margin distance from the bottom
edge of the paper.
Lines
- Set the number of lines on each page.
Tray Command
- Select this setting if a tray mismatch appears
when you use the HP drivers.
BR-Script 3 Error Print
- Choose whether the machine prints the error
information when errors occur.
CAPT
- Use CAPT (Colour Advanced Printing
Technology) for optimal print quality when
printing a PS file created by a non-Brother PS
driver.
Colours and photos appear clearer and more
accurate. Print speed will be slower.
ColourCorrection Calibration Calibrate
Initiate colour calibration to check and correct
colours.
Reset
Reset the calibration parameters to the default
settings.
Registration
- Align the print position of each colour.
Auto Correction
- Set the machine to perform Colour Calibration
and Registration automatically.
Colour Settings Setting Mode
Select whether to apply the colour print settings
of the machine or the printer driver.
Colour Mode
Select the colour mode.
Improve Gray
Turn on or off to improve the image quality of
shaded areas.
Enhance
Black
Turn on or off if a black graphic does not print
correctly.
Brightness
Adjust the brightness.
Contrast
Adjust the contrast.
Red
Adjust the red colour.
Green
Adjust the green colour.
Blue
Adjust the blue colour.
[Network]
For wired and wireless network models
Level 1
Level 2 Level 3 Level 4 Descriptions
Wired LAN TCP/IP Boot
Method
- Choose the IP method that best suits your needs.
IP Address
- Enter the IP address.
Subnet
Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
317