Brother HL-L3210CW - Page 332

Level 3 Level 4 Level 5 Level 6 Descriptions
WLAN TCP/IP DNS Server Secondary
Specify the secondary DNS server's IP
address.
APIPA
- Allocate the IP address from the link-local
address range automatically
1
.
IPv6
- Turn the IPv6 protocol on or off. For more
detailed information, go to your model's
FAQs & Troubleshooting page on the
Brother support website at
support.brother.com.
Setup Wizard
- - Configure the wireless network settings
using the setup wizard.
WLAN Assistant
- - Configure your wireless network settings
using the Brother installation disc.
WPS
- - Configure your wireless network settings
using the one-button push method.
WPS w/ PIN
Code
- - Configure the wireless network settings
using WPS with a PIN code.
WLAN Status Status
- Display the wireless Ethernet link status.
Signal
- Display the signal condition.
SSID
- Display SSID.
Comm. Mode
- Display the current Communication
mode.
MAC Address
- - Display the MAC address of the machine.
Set to Default
- - Restore wireless network settings of your
machine to the factory settings.
WLAN Enable
- - Turn the wireless interface on or off.
Wi-Fi
Direct
Push Button
- - Configure your Wi-Fi Direct network
settings using the one-button push
method quickly.
PIN Code
- - Configure your Wi-Fi Direct network
settings using WPS with a PIN code
quickly.
Manual
- - Configure your Wi-Fi Direct network
settings manually.
Group Owner
- - Set your machine as the Group Owner.
Device
Information
Device Name
- View your machine's device name.
SSID
- Display the Group Owner's SSID.
IP Address
- Display your machine's IP Address.
Status
Information
Status
- Display the Wi-Fi Direct network status.
Signal
- Display the current Wi-Fi Direct network
signal strength.
I/F Enable
- - Enable or disable the Wi-Fi Direct
connection.
NFC
- - - Turn the NFC function on or off.
Web Connect
Settings
Proxy Settings Proxy
Connection
- Change the web connection settings.
Address
-
Port
-
User Name
-
327