Brother HL-L5000D - Network Reset

Home > Troubleshooting > Reset Functions > Network Reset
Network Reset
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Use the Network Reset function to restore the print server's network settings, such as password and IP address,
back to its default factory settings.
• Unplug all the interface cables before you perform a Network Reset.
>> HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Press a or b to select the [Reset Menu] option, and then press OK.
2. Press a or b to select the [Network] option, and then press OK.
3. Press a to select [Yes].
The machine will restart automatically.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [Reset Menu] > [Network].
2. Press the option in the table to reset the machine or to exit the process.
Option Description
Yes
Reset the machine.
No
The machine will exit and cancel the reset menu.
3. You will be asked to reboot the machine. Press the option in the table to reboot the machine or to exit the
process.
Option Description
Press Yes for 2 seconds Reboot the machine. The machine will begin the reset.
No
The machine will exit without rebooting.
If you do not reboot your machine, the reset process will not finish and your settings will remain unchanged.
4. Press .
You can also reset the Network settings by pressing [Settings] > [Network] > [Network
Reset].
Related Information
• Reset Functions
280