This will start the Wi-Fi Direct setup. To cancel, press .
4. Do one of the following:
• When your Brother machine is the Group Owner (G/O), it will wait for a connection request from your
mobile device. When [PIN Code] appears, enter the PIN displayed on your mobile device in the
machine. Press [OK] to complete the setup.
If the PIN is displayed on your Brother machine, enter the PIN in your mobile device.
• When your Brother machine is not the G/O, it will display available device names with which to configure
a Wi-Fi Direct network. Select the mobile device to which you want to connect and press [OK]. Search
for available devices again by pressing [Rescan], and then go to the next step.
5. Do one of the following:
• Press [Display PIN Code] to display the PIN on your machine and enter the PIN in your mobile
device. Go to the next step.
• Press [Input PIN Code] to enter a PIN displayed by your mobile device in the machine, and then
press [OK]. Go to the next step.
If your mobile device does not display a PIN, press
on your Brother machine. Go back to the first
step and try again.
6. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup. For details on printing from your mobile device, go to your model's Manuals
page on the Brother Solutions Center at support.brother.com to see the Mobile Print/Scan Guide for Brother
iPrint&Scan.
Related Information
• Configure Your Wi-Fi Direct Network
• Wi-Fi Direct Network Configuration Overview
129
To Next Page
Loading...
