Brother Innov-ís 1250D User Manual

90
UTILITY STITCHES — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Buttonhole sewing
The maximum buttonhole length is about 28 mm (1-1/8 inches) (diameter + thickness of the button).
Buttonholes are sewn from the front of the presser foot to the back, as shown below.
a Reinforcement stitching
The names of parts of buttonhole foot “A”, which is
used for sewing buttonholes, are indicated below.
a Button guide plate
b Presser foot scale
c Pin
d Marks on buttonhole foot
e 5 mm (3/16 inch)
a
Use chalk to mark on the fabric the position
and length of the buttonhole.
a Marks on fabric
b
Pull out the button guide plate of buttonhole
foot “A”, and then insert the button that will
be put through the buttonhole.
1
1
1
1
5
2
1
3
4
A
1

Brother Innov-ís 1250D Specifications

General

LCD Display	Yes
Needle Threading System	Automatic
USB Port	Yes
LCD Screen	Yes
Automatic Needle Threader	Yes
Thread Cutter	Automatic
Lighting	LED
Buttonhole Styles	10
Built-in Memory	Yes
Type	Sewing and Embroidery
Sewing Speed	850 stitches per minute
Presser Feet	7
Built-in Fonts	5