37
Attaching the lace
a
Place the lace under the fabric leaving a 5 mm
(1/4") overlap at the edge.
b
Place the overlapping edges under the presser
foot and sew.
● A decorative touch can be added by using
the Satin Stitch or a Decorative Stitch to
attach the lace.
Cording
a
Set the stitch width knob so the needle will
just clear both sides of the cording.
b
Place the cord on the fabric in the position
where it will be sewn.
c
Lower the presser foot making sure the cord is
centered and sew using the zigzag stitch.
Guide the cord by hand along the path which
you wish to attach it.
Stitch width
0
Stitch length
2-4
Needle position M
Presser foot Zigzag
Needle Single
Stitch width
Set according to the thickness of
the cord being used.
Stitch length
F-2
Needle position M
Presser foot Zigzag
Needle Single
To Next Page
Loading...
Need help?
General
