Brother LZ2-B855E User Manual (English)

Other manuals for Brother LZ2-B855E

Questions and Answers:

T
tranandrewAug 2, 2025
Why does my Brother LZ2-B855E skip stitches?
- R
  Ruth BatesAug 2, 2025
  If skipped stitches occur while sewing with your Brother Sewing Machine, several factors could be at play. The needle tip might be bent or blunt; if so, replace the needle. Ensure the needle is correctly installed and the machine is properly threaded. Insufficient presser foot pressure can also cause this, so adjust it accordingly. If the needle is too thin, replace it with a slightly thicker one. Also, make sure that the presser foot is at the correct height. In some cases, the needle and rotary hook timing may be off, requiring adjustment of the needle bar height and clearance. Finally, check the thread tension spring and adjust its tension if necessary.
M
Melody WilsonAug 9, 2025
How to fix loose upper thread on my Brother LZ2-B855E?
- P
  Paul KingAug 9, 2025
  If the upper thread is not tight on your Brother Sewing Machine, it could be due to the upper thread tension being too weak or the lower thread tension being too strong. To resolve this, adjust either the upper thread tension or the lower thread tension accordingly.
M
Michele RobertsonAug 16, 2025
What to do if lower thread is not tight on Brother LZ2-B855E?
- T
  timothyriveraAug 16, 2025
  If the lower thread is not tight on your Brother Sewing Machine, it may be because the lower thread tension is too weak, or the upper thread tension is too strong. Try adjusting the lower thread tension or the upper thread tension to correct this.
N
Nicole ButlerAug 23, 2025
Why does my Brother Sewing Machine make flattened zigzags?
- R
  ryan82Aug 23, 2025
  If you notice flattened zigzags appearing in the stitch during intermittent sewing with your Brother Sewing Machine, it might be because the treadle was depressed backward when the sewing machine was stopped. Avoid pressing the treadle backward in this situation. Additionally, if the treadle moves too easily when depressed backward, adjust the force required to depress the treadle backward so that it is a bit heavier.