Installing the Power Supply and Tape Cassette
Using the Optional AC Adapter
1 Insert the small plug on the adapter cord into the AC adapter socket at the top of the machine.
2 Insert the power plug into the nearest standard electrical socket.
127(
For the memory backup feature, we recommend using AAA alkaline batteries (LR03) together when using the AC adapter.
Remove the cassette cover by pressing the
highlighted area.
If you already installed a tape cassette, remove it by
pulling it straight up. If you already installed batteries,
remove them as well.
batteries or tape cassettes.
Insert a tape cassette, making sure it snaps
into place.
guide.
with this P-touch labelling
machine.
Insert four new AAA alkaline batteries (LR03),
making sure their positive and negative ends
point in the correct directions.
using brand new ones.
see Using the Optional AC Adapter.
Insert the two hooks at the bottom of the
cassette cover into the slots on the machine
(1), and then close the cover securely until
it snaps into place (2).
After you have installed the tape, feed the tape
(see Feeding (Tape Feed)) once, and then press
the tape cutter lever to cut the tape.
To Next Page
Loading...
