2
2
Load plain Letter/A4
paper
a Pull paper tray#1 (the upper tray) a
completely out of the machine.
b Open the paper tray cover a.
c With both hands, gently press and slide the
paper side guides a and then the paper length
guide b to fit the paper size.
Make sure that the triangular marks c on the
paper side guides a and paper length guide b
line up with the mark for the paper size you are
using.
d Fan the stack of paper well to avoid paper jams
and misfeeds.
e Gently put the paper into paper tray#1 print
side down and top edge first. Check that the
paper is flat in the tray.
f Gently adjust the paper side guides to the
paper with both hands. Make sure that the
paper side guides touch the edges of the
paper.
Note
When you use Legal, A3 or Ledger size paper,
press and hold the universal guide release
button a as you slide out the front of paper
tray#1.
1
1
1
Important
Do not push the paper in too far.
3
2
1
3
To Next Page
Loading...
Need help?
General
