How to improve transmitting quality on my Brother All in One Printer?
To improve transmitting quality on your Brother All in One Printer, try changing your resolution to FINE or SUPERFINE. Make a copy to verify the MFC’s scanner operation.
What does 'TONER LOW' mean on my Brother MFC-6800 All in One Printer?
If the LCD shows 'TONER LOW' on your Brother All in One Printer, you can still print, but the toner is running low. It's recommended to order a new toner cartridge now.
What does 'CHANGE DRUM SOON' mean on my Brother MFC-6800?
If your Brother All in One Printer shows 'CHANGE DRUM SOON', it means the drum unit is near the end of its life. Continue using the drum unit until you experience a print quality issue, then replace it with a new one.
What to do if my Brother All in One Printer says 'TONER EMPTY'?
If your Brother All in One Printer shows 'TONER EMPTY', it means the toner is used up and printing is not possible, or the toner cartridge is not installed into the drum unit. Replace the toner cartridge with a new one, or install the cartridge into the drum unit.
Why does my Brother MFC-6800's Transmission Verification Report print 'Results:NG'?
If the Transmission Verification Report prints “Results:NG” on your Brother All in One Printer, there is probably temporary noise or static on the phone line. Try sending the fax again. If the problem continues, call the telephone company to check your phone line.
What to do if my Brother All in One Printer says 'CHECK PAPER SIZE'?
If your Brother All in One Printer shows 'CHECK PAPER SIZE', it means your Paper Size setting may not be set correctly for the paper you are using. Change either the paper in the multi-purpose sheet feeder or change the paper size setting, and then press Fax Start.
What does 'NOT REGISTERED' mean on my Brother All in One Printer?
If your Brother All in One Printer shows 'NOT REGISTERED', it means you tried to access a Speed Dial number that is not programmed. Set up the Speed Dial number.
What does 'MACHINE ERROR XX' mean on my Brother MFC-6800?
If your Brother All in One Printer shows 'MACHINE ERROR XX', it means the MFC has a mechanical problem. Turn off the power and contact Brother Customer Service.
What to do if my Brother MFC-6800 says 'CHECK DRUM UNIT'?
If your Brother All in One Printer shows 'CHECK DRUM UNIT', it means the drum unit is not installed. Reinstall the drum unit.
What to do if my Brother All in One Printer says 'COVER OPEN PLS CLOSE COVER'?
If your Brother All in One Printer shows 'COVER OPEN PLS CLOSE COVER', it indicates that the top cover was not completely closed. Open, then close the cover.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Technology | Inkjet |
| Print Speed (Black) | 12 ppm |
| Print Speed (Color) | 10 ppm |
| Copy Speed | Up to 12 cpm (Black), Up to 10 cpm (Color) |
| Fax Modem Speed | 33.6 Kbps |
| Paper Capacity | 100 sheets |
| Connectivity | USB, Parallel |
| Scanner Type | Flatbed |
| Scan Resolution | 600 x 2400 dpi |
| Media Types | Envelopes |
To Next Page
