if
A
CAUTION
Avoid placing your product in a higti-traffic
area.
If you must place it in a fiigfi-traffic
area,
ensure
that the product is in a
safe
location where it cannot be accidentally knocked-over, which could
cause
injury to you or others and serious damage to the product. Also ensure that cords are
secured
so as not to pose a
tripping
hazard.
DO
NOT eat the
silica
gel pack.
Please
throw away, if ingested
seek
medical attention
immediately.
DO
NOT place heavy objects on the product. DO NOT place this product on an unstable cart,
stand,
or table, particularly if children are expected to be near the product. The product is heavy
and
may fail, causing injury to you or others, and serious damage to the product. For
fvIFC
and
DCP
products, there is an added risk of injury if the scanner
glass
should break.
O Important -
• DO NOT put objects on top of the product. Doing so could increase the risk of overheating
should the product malfunction.
• DO NOT place your product next to devices that contain magnets or generate magnetic fields.
Doing so may interfere with the operation of the product, causing
print
quality problems.
• DO NOT place your product next to sources of inferference, such as
speakers
or the
base
units
of non Brother cordless telephones. Doing so may interfere with the operation of the product's
electronic components.
• DO NOT connect your product to an AC power outlet controlled by wail switches or automatic
timers.
Disruption of power can delete information from the product's memory.
• DO NOT connect your product to an AC power outlet on the same circuit as large appliances
or other equipment that requires a significant amount of electricity to operate. Operating this
product in conjunction with the other product(s) could create an overvoitage,
tripping
your
circuit breaker or blowing your
fuse.
To Next Page
Loading...
Need help?
General
