What does 'Replace Parts Drum' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'Replace Parts Drum', it means it's time to replace the drum unit. Replace the drum unit. Also, if you have already installed a new drum, reset the drum unit counter.
What to do if my Brother MFC-8710DW says 'Connection Fail'?
If you see a 'Connection Fail' message on your Brother printer, it means the printer and your mobile device aren't communicating properly during setup. To fix this: * Move your mobile device closer to the Brother printer. * Ensure there are no obstructions between the printer and the mobile device. * If using the PIN Method of WPS, verify that you've entered the correct PIN code.
How to fix Brother MFC-8710DW when wireless network setup configuration cannot be completed?
If you cannot complete the wireless network setup configuration on your Brother Printer, here are a few things to try: First, turn your wireless router off and then back on, and try configuring the wireless settings again. Second, double-check and make sure you're choosing the correct security settings. You might find these settings on your WLAN access point/router or by contacting your Internet provider or network administrator. Third, confirm that the MAC address of your Brother machine is allowed in the filter; you can usually find this on the printer's control panel. Also, make sure you're typing the correct SSID name or Network Key manually. Lastly, try using the Network Connection Repair Tool.
What to do if my Brother Printer shows a 'No Device' error?
If your Brother printer displays a 'No Device' error, it means the printer can't find your mobile device. Here’s what to do: * Ensure both your printer and mobile device are in Wi-Fi Direct mode. * Move the mobile device closer to the Brother printer. * Remove any obstructions between the devices. * If manually configuring Wi-Fi Direct, verify the password is correct. * If your mobile device requires IP address configuration, ensure it's set to DHCP.
How to resolve 'Access Denied' on Brother All in One Printer?
If your Brother All in One Printer displays 'Access Denied', contact your administrator to check your Secure Function Lock Settings. This function is restricted by Secure Function Lock 2.0.
What should I do if my Brother All in One Printer says 'No Toner'?
If your Brother All in One Printer displays 'No Toner', remove the drum unit and toner cartridge assembly, remove the toner cartridge from the drum unit, and re-install the toner cartridge back into the drum unit again. Re-install the drum unit and toner cartridge assembly back in the machine. This issue occurs when the toner cartridge or the drum unit and toner cartridge assembly is not installed correctly.
What to do if Authentication/Encryption methods are not supported by Brother All in One Printer?
If the authentication/encryption methods used by the selected wireless access point/router are not supported by your Brother All in One Printer, change the authentication and encryption methods of the wireless access point/router for infrastructure mode. Your machine supports the following authentication methods: WPA™, WPA2™, OPEN, and Shared key. WPA supports TKIP or AES encryption methods. WPA2 supports AES for the encryption method. OPEN and Shared key correspond to WEP encryption. Reconfirm the wireless network settings.
What to do if Brother All in One Printer detects two or more wireless access points/routers with WPS or AOSS™ enabled?
If two or more wireless access points/routers that have WPS or AOSS™ enabled are detected by your Brother All in One Printer, confirm that only one wireless access point/router within range has the WPS or AOSS™ method active and try again. You can also try starting again after a few minutes to avoid interference from other wireless access points/routers.
How to fix 'Cartridge Error Put the Toner Cartridge back in' on Brother All in One Printer?
If your Brother All in One Printer displays 'Cartridge Error Put the Toner Cartridge back in', it means the toner cartridge isn't installed correctly. Remove the drum unit and toner cartridge assembly, take out the toner cartridge, and put it back into the drum unit again. Then, put the drum unit and toner cartridge assembly back in the machine.
How to activate wireless setting on Brother All in One Printer?
To activate the wireless setting on your Brother All in One Printer, turn the wireless setting to ON. If a LAN cable is connected, disconnect it and then turn the wireless setting on. On your printer, press Menu, then 7 (Network), then 2 (WLAN), then 2 (Setup Wizard). When 'WLAN Enable ?' is displayed, choose 'On' and press OK. This will start the wireless setup wizard.
General| Secure printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 8.5 s |
| Print speed (black, normal quality, A4/US Letter) | 40 ppm |
| PictBridge | No |
| Networking features | Fast Ethernet |
| All-in-one functions | Copy, Fax, Print, Scan |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u |
| Connectivity technology | Wired & Wireless |
| Color all-in-one functions | Scan |
| Printing colors | Black |
| Maximum duty cycle | 50000 pages per month |
| Recommended duty cycle | 500 - 3500 pages per month |
| Number of print cartridges | 1 |
| Page description languages | BR-Script 3, Epson FX, IBM ProPrinter, PCL 6 |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 1200 x 600 DPI |
| Maximum number of copies | 99 copies |
| N-in-1 copy function (N=) | 2, 4 |
| Time to first copy (black, normal) | 10.5 s |
| Copy speed (black, normal quality, A4) | 40 cpm |
| Scan to | CIFS, E-mail, E-mail Server, File, FTP, Image, OCR, USB |
| Scanner type | Flatbed & ADF scanner |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Maximum scan area | Legal (216 x 356) mm |
| Output color depth | 24 bit |
| Image formats supported | JPG, PNG, TIF |
| Maximum scan resolution | 19200 x 19200 DPI |
| Document formats supported | |
| Faxing | Mono faxing |
| Fax memory | 500 pages |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, JPEG, MH, MMR (Fax coding method), MR |
| Fax resolution (black) | 203 x 203 DPI |
| Fax transmission speed | 2.5 sec/page |
| Fax speed dialing (max numbers) | 300 |
| Paper input type | Paper tray |
| Total input capacity | 250 sheets |
| Total output capacity | 150 sheets |
| Auto document feeder (ADF) input capacity | 50 sheets |
| Custom media width | 76.2 - 215.9 mm |
| Maximum print size | 216 x 356 mm |
| Custom media length | 127 - 355.6 mm |
| Paper tray media types | Bond paper, Envelopes, Labels, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| Non-ISO print media sizes | Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size) |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| JIS B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Paper tray media weight (imperial) | 16 - 28 lbs |
| Multi-Purpose Tray media weight (imperial) | 16 - 43 lbs |
| Auto Document Feeder (ADF) media weight (imperial) | 17 - 24 lbs |
| Display | LCD |
| Market positioning | Business |
| Display number of lines | 5 lines |
| Display number of characters | 22 |
| Standard interfaces | USB 2.0 |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Security algorithms | 128-bit WEP, 64-bit WEP, 802.1x RADIUS, EAP-TLS, EAP-TTLS, LEAP, MD5, PEAP, TKIP, WPA-AES, WPA-EAP, WPA-PSK, WPA-TKIP, WPA2-EAP, WPA2-PSK |
| Supported network protocols (IPv4) | ARP, RARP, BOOTP, DHCP, APIPA (Auto IP), WINS/NetBIOS, DNS, mDNS, LLMNR, LPR/LPD, Raw Port/Port9100, POP3, SMTP, IPP/IPPS, FTP, LDAP, CIFS, TELNET, SNMPv1/v2c/v3, HTTP/HTTPS, TFTP, ICMP, Web Services (Print/Scan), SNTP |
| Supported network protocols (IPv6) | NDP, RA, DNS, mDNS, LLMNR, LPR/LPD, Raw Port/Port9100, IPP/IPPS, FTP, LDAP, CIFS, TELNET, SNMPv1/v2c/v3, HTTP/HTTPS, TFTP, SMTP, ICMPv6, SNTP, Web Services (Print/Scan) |
| Maximum internal memory | 320 MB |
| Sound power level (standby) | 37 dB |
| Sound pressure level (copying) | 59 dB |
| Sound pressure level (quiet mode) | 54 dB |
| AC input voltage | 120 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (off) | 1.4 W |
| Power consumption (standby) | 8.1 W |
| Power consumption (average operating) | 702 W |
| Package depth | 533.4 mm |
| Package width | 594.36 mm |
| Package height | 604.52 mm |
| Package weight | 20000 g |
| Storage temperature (T-T) | 0 - 40 °C |
| Operating temperature (T-T) | 10 - 32.7 °C |
| Storage relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity (H-H) | 20 - 80 % |
| Mac operating systems supported | Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion |
| Windows operating systems supported | Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Professional, Windows XP Professional x64 |
| Bundled software | Nuance PaperPort SE\\r Presto! PageManager |
| Sustainability certificates | ENERGY STAR |
Weight and Dimensions| Depth | 414.02 mm |
|---|---|
| Width | 490.22 mm |
| Height | 447.04 mm |
To Next Page