Brother MFC-8710DW - Tray Use in FAX Mode; Tray Use in Print Mode

To Next Page

To Previous Page

Chapter 2

Tray Use in FAX mode 2

You can change the default tray that the

machine will use for printing received faxes.

When you choose Tray#1 Only, MP Only

or Tray#2 Only

, the machine pulls the

paper only from that tray. If the selected tray

is out of paper, No Paper will appear on the

LCD. Insert the paper in the empty tray.

When you choose T1>T2

>MP, the machine

pulls paper from Tray #1 until it is empty, then

from Tray #2, and then from the MP tray.

When you choose MP>T1>T2

, the machine

pulls paper from the MP tray until it is empty,

then from Tray #1, and then from Tray #2.

Note

• You can use four sizes of paper for

printing faxes: Letter, A4, Legal or Folio.

When a suitable size is not in any of the

trays received faxes will be stored in the

machine’s memory and Size mismatch

will appear on the LCD. (For details, see

Error and maintenance messages

uu page 83.)

• If the tray is out of paper and received

faxes are in the machine’s memory,

No Paper will appear on the LCD. Insert

paper in the empty tray.

a Press Menu, 1, 6, 2.

16.Tray Use

2.Fax

a MP>T1>T2

b T1>T2>MP

Select ab or OK

b Press a or b to choose Tray#1 Only,

Tray#2 Only

, MP Only,

MP>T1>T2

or T1>T2

>MP.

Press OK.

c Press Stop/Exit.

Tray#2 Only and T2 appear only if the optional

lower tray is installed on the MFC-8710DW or

MFC-8910DW.

Tray Use in print mode 2

You can change the default tray the machine

will use for printing from your computer and

for Direct print.

a Press Menu, 1, 6, 3.