Brother MFC-8810DW - Page 166

154
7.Network
(MFC-8710DW)
(Continued)
(
4.E-mail/
IFAX
)
(Continued)
3.Setup Mail RX 1.Auto Polling — On*
Off
Automatically
checks the POP3
server for new
messages.
See .
2.Poll Frequency — 10*
[01-60] Min
Sets the interval for
checking for new
messages on the
POP3 server.
3.Header — All
Subject+From+To
None*
Selects the
contents of the
mail header to be
printed.
4.Del Error Mail — On*
Off
Deletes error mails
automatically.
5.Notification — On
MDN
Off*
Receives
notification
messages.
4.Setup Mail TX 1.Sender Subject — — Displays the
subject that is
attached to the
Internet Fax data.
2.Size Limit — On
Off*
Limits the size of
E-mail documents.
3.Notification — On
Off*
Sends notification
messages.
5.Setup Relay 1.Rly Broadcast — On
Off*
Relays a document
to another fax
machine.
2.Relay Domain — — Registers the
Domain name.
3.Relay Report — On
Off*
Prints the Relay
Broadcast Report.
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions Page
See Network User's Guide.
Please go to the Brother Solutions Center to download the manual at http://solutions.brother.com/
.
 The factory settings are shown in Bold with an asterisk.
 LDAP, Internet Fax and Scan to E-mail Server functions are available as a download.
 To use these functions, please download the necessary software from our web site, the Brother
Solutions Center at http://solutions.brother.com/
.
 Level 2 menus inside parentheses appear if you download IFAX/E-mail options to your machine.