Brother MFC-8810DW - Page 39

Sending a fax
27
4
f Press Start.
Faxing from the ADF
 The machine starts scanning the
document.
Faxing from the scanner glass
 The machine starts scanning the first
page.
Do one of the following:
• To send a single page, press 2 to
choose No (Send) or press
Start again. The machine starts
sending the document.
• To send more than one page,
press 1 to choose Yes and place
the next page on the scanner
glass. Press OK. The machine
starts scanning the page. (Repeat
this step for each additional
page.) Press 2 to choose
No (Send) when all the pages
have been scanned. The
machine starts sending the
document.
Note
To cancel a fax in process, press
Stop/Exit.
Fax settings 4
You can change fax settings.
(See Advanced User's Guide: Sending a fax.)
 Duplex Scan (2-sided fax layout)
(For MFC-8810DW and MFC-8910DW)
 Contrast
 Fax Resolution
 Broadcast
 Real Time TX
 Overseas Mode
 Delayed Fax
 Batch TX
 Coverpage (Setup)
 Coverpage (Message)
 Destination
 Polled TX