What to do if my Brother MFC 8890DW - B/W Laser - All-in-One All in One Printer has vertical black line appears in copies?
Black vertical lines on copies are typically caused by dirt or correction fluid on the glass strip, or the corona wire for printing is dirty. Clean the scanner and the corona wire.
How to fix vertical black lines when sending from Brother All in One Printer?
Black vertical lines on faxes you send are typically caused by dirt or correction fluid on the glass strip. Clean the scanner.
What to do if Brother MFC 8890DW - B/W Laser - All-in-One prints the first couple of pages correctly, then some pages have text missing?
Your computer is not recognizing the machine’s input buffer’s full signal. Make sure that you connected the interface cable correctly.
What to do if my Brother MFC 8890DW - B/W Laser - All-in-One All in One Printer has toner specks?
The drum unit may be damaged. Put in a new drum.
How to fix transmission verification report says ‘RESULT:NG’ on Brother MFC 8890DW - B/W Laser - All-in-One All in One Printer?
If the Transmission Verification Report shows ‘RESULT:NG’, it's likely due to temporary noise or static on the line. Try sending the fax again. Also, your machine may be out of memory. To free up extra memory, turn off fax storage.
What to do if my Brother MFC 8890DW - B/W Laser - All-in-One cannot receive a fax?
If you hear static or interference on your fax line, contact your local telephone company. Make sure your machine has a dial tone by pressing the Hook key. Check all line cord connections and ensure the machine is in the correct Receive Mode.
What to do if my Brother MFC 8890DW - B/W Laser - All-in-One All in One Printer cannot receive a fax and received faxes appear as split or blank pages?
If received faxes appear as split or blank pages, your paper size setting may not be correct for the paper you are using. Turn on Auto Reduction.
Why does my Brother MFC 8890DW - B/W Laser - All-in-One not answer when called?
Make sure the machine is in the correct receive mode for your setup. Check for a dial tone. Ask your telephone company to check the line.
What to do if my Brother MFC 8890DW - B/W Laser - All-in-One cannot receive a fax (continued)?
Another device or service at your location may be answering the call before your Brother machine answers. To test this, lower the ring delay setting. If you received the test fax successfully, your machine is operating properly.
What to do if my Brother MFC 8890DW - B/W Laser - All-in-One dialing does not work?
Check for a dial tone. Change the Tone/Pulse setting. Check all line cord connections. Check that the machine is plugged in and switched on. Send a manual fax by pressing Hook or by lifting the handset of an external telephone and dialing the number.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Printing Technology | Laser |
| Print Speed | Up to 32 ppm |
| Print Resolution | Up to 1200 x 1200 dpi |
| Automatic Duplex Printing | Yes |
| Scanner Type | Flatbed, ADF |
| ADF Capacity | 50 sheets |
| Fax Modem Speed | 33.6 Kbps |
| Standard Paper Capacity | 250 sheets |
| Memory | 64 MB |
| Display | 5-line LCD |
| Printer Type | Laser |
| Scan Resolution | Up to 19200 x 19200 dpi (interpolated) |
| Connectivity | Ethernet |
Describes machine's control panel keys, LCD, and status LED.
Instructions for loading paper into standard and multi-purpose trays.
Steps for using the ADF and scanner glass for document input.
Covers sending faxes via ADF, scanner glass, and managing transmissions.
Details on receive modes, settings, and handling incoming faxes.
Methods for dialing, storing, and accessing numbers quickly.
Basic steps for copying, including single, multiple, and stop operations.
Essential safety, regulatory, and legal compliance details.
Comprehensive guide to resolving issues and performing regular upkeep.
To Next Page
