Brother MFC-J491DW Manual

(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
• Consult with an experienced radio/TV technician for help.
• (Wireless network models only)
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
IMPORTANT
• Changes or modifications not expressly approved by Brother Industries, Ltd. could void the
user’s authority to operate the equipment.
• A shielded interface cable should be used to ensure compliance with the limits for a Class B
digital device.
RF Exposure Notice (USA or Canada Only) (Wireless Models
Only)
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the
IC radio frequency (RF) Exposure rules. This equipment should be installed and operated
keeping the radiator at least 20 cm or more away from a person's body.
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un
environnement non contrôlé et respecte les lignes directrices d'exposition aux fréquences
radioélectriques (RF) de la FCC et les règles d’exposition aux fréquences radioélectriques (RF)
CNR-102 de l’IC. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm
ou plus entre le radiateur et le corps humain.
16

Brother MFC-J491DW Specifications

General

Display	LCD
Product color	Black
Built-in display	Yes
Display diagonal	1.77 \
Market positioning	Home & office
Internal memory	128 MB
Card reader integrated	No
Sound pressure level (copying)	50 dB
Print technology	Inkjet
Maximum resolution	1200 x 6000 DPI
Duplex printing mode	Auto
Print speed (ISO/IEC 24734) mono	12 ipm
Print speed (ISO/IEC 24734) color	6 ipm
Time to first page (black, normal)	8 s
Duplex print speed (ISO/IEC 24734) mono	3 ipm
Duplex print speed (ISO/IEC 24734) color	1.7 ipm
Print speed (black, normal quality, A4/US Letter)	27 ppm
Print speed (color, normal quality, A4/US Letter)	10 ppm
Standard interfaces	USB 2.0, Wireless LAN
USB 2.0 ports quantity	1
Copier resize	25 - 400 %
Maximum copy resolution	1200 x 600 DPI
Package depth	249 mm
Package width	447 mm
Package height	457 mm
Package weight	10100 g
Power consumption (off)	0.2 W
Power consumption (sleep)	1 W
Power consumption (standby)	3.5 W
Power consumption (printing)	16 W
Power consumption (average operating)	- W
Sustainability certificates	Nordic Swan Ecolabel, ENERGY STAR
Faxing	Mono faxing
Fax memory	170 pages
Modem speed	14.4 Kbit/s
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Security algorithms	64-bit WEP, 128-bit WEP, WPA-PSK, WPA2-PSK
Mobile printing technologies	Apple AirPrint, Mopria Print Service
Paper input type	Paper tray
Total input capacity	100 sheets
Total output capacity	50 sheets
Auto document feeder (ADF) input capacity	20 sheets
Paper tray media types	Plain paper
Borderless printing media sizes	A4
Scan to	E-mail, File, Image, OCR
Scanner type	Flatbed & ADF scanner
Input color depth	30 bit
Output color depth	24 bit
Maximum scan resolution	19200 x 19200 DPI
Optical scanning resolution	1200 x 2400 DPI
Digital sender	-
Maximum duty cycle	- pages per month
Harmonized System (HS) code	84433100

Weight and Dimensions

Depth	341 mm
Width	400 mm
Height	172 mm