v
Confidential
[ 13 ] Obtain machine information at the user site (Instruction to the end user) ........4-29
4.2 IF YOU REPLACE THE MAIN PCB...........................................................................4-30
[ 1 ] Load update programs/data..............................................................................4-31
[ 2 ] Customize the EEPROM on the main PCB (Function code 74).......................4-36
[ 3 ] Initialize the EEPROM on the main PCB (Function code 01)...........................4-36
[ 4 ] Load local programs .........................................................................................4-36
[ 5 ] Restore machine information (Function code 46).............................................4-36
[ 6 ] Restore head calibration data (Function code 68)............................................4-36
[ 7 ] Check the sensor operation (Function code 32)...............................................4-36
[ 8 ] Set an ID code (change the serial number) and update the head property
data...................................................................................................................4-37
[ 9 ] Acquire white level data and set CIS scanner area (Function code 55)...........4-39
[ 10 ] Update the paper feeding correction value (Function code 58)........................4-39
[ 11 ] Align vertical print lines (Function code 65)......................................................4-39
[ 12 ] Adjust margins in borderless printing (Function code 66).................................4-39
[ 13 ] Create head calibration data and write it into flash ROM (Function code 02) ..4-39
[ 14 ] Print out an ADF copy chart and make a copy of that chart in ADF scanning..4-39
[ 15 ] Print out a total quality check pattern................................................................4-39
[ 16 ] Adjust the touch panel (Function code 78) (For models with touch panel).......4-39
[ 17 ] Switch back to standby.....................................................................................4-39
4.3 IF YOU REPLACE THE ADF OR ADF-RELATED PARTS.......................................4-40
[ 1 ] Print out an ADF copy chart and make a copy of that chart in ADF scanning..4-40
4.4 IF YOU REPLACE THE INK ABSORBER BOX OR FLUSHING BOX .....................4-43
[ 1 ] Reset each of the purge and flushing counts ...................................................4-43
4.5 IF YOU REPLACE THE CONTROL PANEL ASSY, CONTROL PANEL PCB OR
LCD UNIT ...................................................................................................................4-43
[ 1 ] Adjust the touch panel (Function code 78) (For models with touch panel).......4-43
[ 2 ] Check LCD operation (Function code 12) ........................................................4-43
[ 3 ] Check the operation of the control panel PCB (Function code 13)...................4-43
4.6 IF YOU REPLACE THE FB UNIT* OR SCANNER COVER (SCANNER UNIT) .......4-44
[ 1 ] Acquire white level data and set CIS scanner area (Function code 55)...........4-44
[ 2 ] Print out an ADF copy chart and make a copy of that chart in ADF scanning
(For models with ADF)......................................................................................4-44
To Next Page
Loading...
Need help?
General
Weight and Dimensions
