Brother MFC-J6910DW - Set the Date and Time; Set Your Station ID

10
9
Set the date and time
The machine displays the date and time, and if you
set up the station ID, it will add it to each fax you send.
a Press MENU.
b Press a or b to display Initial Setup.
c Press Initial Setup.
d Press Date&Time.
e Enter the last two digits of the year on the
Touchscreen, and then press OK.
f Enter the two digits for the month on the
Touchscreen, and then press OK.
g Enter the two digits for the day on the
Touchscreen, and then press OK.
h Press 12h Clock or 24h Clock.
i Enter the time on the Touchscreen.
(12h Clock only)
Press to cycle AM and PM.
j Press OK, then Stop/Exit.
10
Set your Station ID
You should store your name and fax number to be
printed on all fax pages that you send.
For details, see Entering Text in Appendix C of the
Basic User’s Guide.
a Press MENU.
b Press a or b to display Initial Setup.
c Press Initial Setup.
d Press Station ID.
e Enter your fax number (up to 20 digits) on the
Touchscreen, and then press OK.
f Enter your name (up to 20 characters) using
the Touchscreen, and then press OK.
g Press Stop/Exit.
(e.g. Enter 1 1 for 2011.)
Note
• Press to cycle between letters, numbers
and special characters. (The characters
available may differ depending on your
country.)
• If you need to enter a character that is on the
same button as the character before, press c to
move the cursor to the right.
• If you entered a character incorrectly and want
to change it, press d or c to move the cursor to
the incorrect character, press .
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to a.