EasyManuals Logo

Brother MFC-L2712DW User Manual

Brother MFC-L2712DW
340 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
viii
Confidential
To use the Machine Safely
Please keep these instructions for later reference and read them before attempting any
maintenance. If you do not follow these safety instructions, there is a possibility of a fire,
electrical shock, burn or suffocation.
WARNING
ELECTRICAL HAZARDS
Failure to follow the warnings in this section may create the risk of an electrical shock. In
addition, you could create an electrical short, which may create the risk of a fire.
There are high-voltage electrodes inside the product. Before
you access the inside of the product, including for routine
maintenance such as cleaning, make sure you have unplugged
the telephone line cord first (MFC models only) and then the
power cord from the AC power outlet, as well as any telephone/
RJ-11 (MFC models only) or Ethernet/RJ-45 cables (Network
models only) from the product. DO NOT push objects of any
kind into this product through slots or openings in the product,
as they may touch dangerous voltage points or short out parts.
DO NOT handle the plug with wet hands. Doing this might cause an
electrical shock.
DO NOT use this product during a thunderstorm. There may be a remote risk of an electrical
shock from lightning.
Always make sure the plug is fully inserted. DO NOT use the product or handle the cord if
the cord has become worn or frayed.
DO NOT allow this product to come into contact with water. This product should not be used
around standing water, including a bath tub, sink, or swimming pool; around appliances
containing water, including a refrigerator; or in a wet basement.
This product should be connected to an AC power source within the range indicated on the
rating label (You can find the rating label on your machine). DO NOT connect it to a DC
power source or inverter. If you are not sure what kind of power source you have, contact a
qualified electrician.
WARNING
When removing the Low-voltage power supply, do not touch it within
3 minutes after disconnecting the AC cord as it may cause an electric
shock due to the electric charge accumulated in the capacitor.

Table of Contents

Other manuals for Brother MFC-L2712DW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-L2712DW and is the answer not in the manual?

Brother MFC-L2712DW Specifications

General IconGeneral
Duplex printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Duplex printing modeAuto
Time to first page (black, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)30 ppm
Duplex print speed (black, normal quality, A4/US Letter)15 ppm
Copier resize25 - 400 %
Maximum copy resolution600 x 600 DPI
N-in-1 copy function (N=)2, 4
Copy speed (black, normal quality, A4)30 cpm
Scan toE-mail, File, Image, OCR
Grayscale levels256
Output color depth24 bit
Scan speed (black)23.6 ppm
Scan speed (color)7.5 ppm
Output grayscale depth8 bit
FaxingMono faxing
Modem speed33.6 Kbit/s
Fax speed dialing (max numbers)200
Digital sender-
Printing colorsBlack
Maximum duty cycle15000 pages per month
Page description languagesGDI
DisplayLCD
Market positioningHome & office
Display number of lines2 lines
Paper input typePaper tray
Total input capacity250 sheets
Total output capacity120 sheets
Total number of input trays1
Auto document feeder (ADF) input capacity50 sheets
Maximum print size215 x 355 mm
Paper tray media typesBond paper, Envelopes, Plain paper, Recycled paper
Paper tray media weight60 - 163 g/m²
ISO A-series sizes (A0...A9)A4, A5, A6
Multi-purpose tray media typesExecutive, Letter
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 230 g/m²
Auto Document Feeder (ADF) media weight64 - 105 g/m²
Sound power level (standby)30 dB
Sound pressure level (printing)48 dB
Sound pressure level (quiet mode)44 dB
USB connectorUSB Type-A
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology10/100Base-T(X)
Security algorithms64-bit WEP, 128-bit WEP, SMTP-AUTH, SNMPv3, SSL/TLS, WPA-AES, WPA-PSK, WPA-TKIP, WPA2-AES, WPA2-PSK, WPA2-TKIP
Ethernet LAN data rates10, 100 Mbit/s
Mobile printing technologiesApple AirPrint, Brother iPrint & Scan, Google Cloud Print, Mopria Print Service
Supported network protocols (IPv4)ARP, RARP, BOOTP, DHCP, APIPA(Auto IP), WINS/NetBIOS name resolution, DNS Resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, SMTP Client, IPP/IPPS, FTP Server, SNMPv1/v2c/v3, HTTP/HTTPS server, TFTP client and server, ICMP, Web Services (Print), SNTP Client
Supported network protocols (IPv6)NDP, RA, DNS resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS, SMTP Client, FTP Server, SNMPv1/v2c/v3, HTTP/ HTTPS server, TFTP client and server, ICMPv6, SNTP Client, Web Services (Print)
Power consumption (off)0.03 W
Power consumption (ready)42 W
Power consumption (sleep)6.2 W
Power consumption (printing)440 W
Power consumption (PowerSave)260 W
Power consumption (average operating)- W
Energy Star Typical Electricity Consumption (TEC)1.232 kWh/week
Sustainability certificatesBlue Angel, ENERGY STAR
Mac operating systems supportedMac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Server operating systems supportedWindows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2
Windows operating systems supportedWindows 7, Windows 8
Package depth517 mm
Package width580 mm
Package height434 mm
Package weight14900 g
Included cartridge capacity (black)1 pages
Weight and Dimensions IconWeight and Dimensions
Depth398.5 mm
Width410 mm
Height318.5 mm

Related product manuals