EasyManua.ls Logo

Brother MFC-L3770CDW - User Manual

Brother MFC-L3770CDW
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Unpack the machine and check the components
NOTE:
•Manuals in Spanish for this model are available on the Brother
Solutions Center. (USA only): support.brother.com/manuals
Los manuales en español de este modelo están disponibles
en el Brother Solutions Center. (Solamente en los Estados
Unidos): support.brother.com/manuals
•The components included in the box may differ depending on
your country.
•The available connection interfaces vary depending on the
model.
•Interface cables are not included. You must purchase the
correct interface cable if you require one.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is
no more than 6 feet (2 meters) long.
Network cable (DCP-L3551CDW / MFC-L3750CDW /
MFC-L3770CDW)
Use a straight-through Category 5 (or greater) twisted-pair
cable.
•The illustrations in this Quick Setup Guide show the
MFC-L3770CDW.
Remove the packing materials and re-install the drum unit and toner cartridge assemblies
Load paper in the paper tray
Connect the power cord and turn on the machine
Select your language (if needed)
Drum Unit and Toner Cartridge
Assemblies*
(Black, Cyan, Magenta, and Yellow)
Waste Toner Box* Belt Unit*
Telephone Line Cord
(For MFC models)
AC Power Cord
Brother Installation Disc Quick Setup Guide Product Safety Guide Reference Guide
3
5
2
1
Back Front
* Already installed in the machine
Watch our Video FAQs for
help with setting up your
Brother machine:
support.brother.com/videos.
Adjust the paper
guides.
Do not exceed this mark.
BK
C
M
Y
Remove the orange part from each cartridge.
Push firmly.
x4
Remove all the blue packing tape.
Slide all eight yellow drum locks.
1. Press Menu.
2. Press▲or▼todisplay
[Initial Setup], and then press
OK.
3. Press▲or▼todisplay
[Local Language], and then press
OK.
4. Press▲or▼toselectyourlanguage,
and then press OK.
5. Press Stop/Exit.
For LCD models
For Touchscreen models
1. On the machine’s touchscreen,
press
[Settings] >
[All Settings] >
[Initial Setup] >
[Local Language].
2. Press your language.
3. Press .
Configure the machine for faxing (For MFC models)
If you do not plan to use the fax feature on this machine, go to step .
6
NOTE:
•For more information on using the fax feature, see the Online User’s Guide.
•Your machine is programmed to automatically receive faxes. To change this default mode, see the Online User’s Guide.
A. Set the date and time
Press [Settings] > [All Settings] >
[Initial Setup] > [Date & Time], and
then set the date and time you want.
B. Set the Station ID
Press [Settings] > [All Settings] >
[Initial Setup] > [Station ID], and then
set your fax or telephone number and your name.
Connect the telephone line cord
(For MFC models)
If you do not plan to use the fax feature on this machine, go to step .
4
Quick Setup Guide
HL-L3290CDW / DCP-L3551CDW / MFC-L3710CW /
MFC-L3750CDW / MFC-L3770CDW
Read the Product Safety Guide first, then read this Quick
Setup Guide for the correct installation procedure.
Not all models are available in all countries.
The latest manuals are available at the Brother Solutions
Center: support.brother.com/manuals.
D00WZ7001-00
USA/CAN
Version 0
Question and Answer IconNeed help?

Do you have a question about the Brother MFC-L3770CDW and is the answer not in the manual?

Brother MFC-L3770CDW Specifications

General IconGeneral
Digital senderYes
Printing colorsBlack, Cyan, Magenta, Yellow
Maximum duty cycle30000 pages per month
Recommended duty cycle300 - 1500 pages per month
Number of print cartridges4
Page description languagesBR-Script 3, PCL 6, PDF 1.7, XPS
N-up printing2, 4, 9, 16, 25
Print technologyLED
Maximum resolution2400 x 600 DPI
Time to first page (black, normal)14 s
Print speed (black, normal quality, A4/US Letter)24 ppm
Copier resize25 - 400 %
Maximum copy resolution600 x 600 DPI
N-in-1 copy function (N=)2, 4
Time to first copy (black, normal)15 s
Copy speed (black, normal quality, A4)24 cpm
Scan toE-mail, FTP, File, Image, OCR, SMB, USB
Scan driversSANE, TWAIN, WIA
Scanner typeFlatbed & ADF scanner
Grayscale levels256
Input color depth48 bit
Output color depth24 bit
Image formats supportedEXIF, JPEG, TIFF
Maximum scan resolution19200 x 19200 DPI
Document formats supportedPDF
Optical scanning resolution2400 x 1200 DPI
Faxing-
Fax memory500 pages
Modem speed33.6 Kbit/s
Fax coding methodsJBIG
Control typeTouch
Product colorBlack, White
Display diagonal3.7 \
Market positioningHome & office
Printer managementWeb Based Management, BRAdmin Professional for Windows, BRAdmin Light for Windows
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology10/100Base-T(X)
Security algorithms64-bit WEP, 128-bit WEP, EAP-FAST, EAP-MD5, EAP-TLS, EAP-TTLS, HTTPS, IPPS, PEAP, SMTP-AUTH, SNMP, SSL/TLS, WPA-AES, WPA-PSK, WPA-TKIP, WPA2-AES, WPA2-PSK, WPA2-TKIP
Ethernet LAN data rates10, 100 Mbit/s
Mobile printing technologiesApple AirPrint, Brother iPrint & Scan, Mopria Print Service
Supported network protocols (IPv4)ARP, RARP, BOOTP, DHCP, APIPA(Auto IP), WINS/NetBIOS name resolution, DNS Resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, SMTP Client, IPP/IPPS, FTP Client and Server, CIFS Client, TELNET Server, SNMPv1/v2c/v3, HTTP/HTTPS server, TFTP client and server, ICMP, Web Services (Print/Scan), SNTP Client
Supported network protocols (IPv6)NDP, RA, DNS resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS, SMTP Client, FTP Client and Server, CIFS Client, TELNET Server, SNMPv1/v2c/v3, HTTP/HTTPS server, TFTP client and server, ICMPv6, SNTP Client, Web Services (Print/Scan)
Standard interfacesEthernet, NFC, USB 2.0, Wireless LAN
Card reader integratedNo
Sound pressure level (printing)47 dB
Power consumption (off)0.04 W
Power consumption (ready)75 W
Power consumption (sleep)10.1 W
Power consumption (standby)1.2 W
Power consumption (printing)430 W
Power consumption (average operating)- W
Mac operating systems supportedMac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra
Server operating systems supportedWindows Server 2008, Windows Server 2008 R2, Windows Server 2008 R2 x64, Windows Server 2008 x64, Windows Server 2012, Windows Server 2012 R2, Windows Server 2012 R2 x64, Windows Server 2012 x64, Windows Server 2016, Windows Server 2016 x64
Windows operating systems supportedWindows 10, Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 IOT Core, Windows 10 Pro, Windows 7, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 7 x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64
Sustainability certificatesENERGY STAR
Package depth523 mm
Package width623 mm
Package height568 mm
Package weight28800 g
Total input capacity250 sheets
Total output capacity150 sheets
Multi-Purpose tray input capacity30 sheets
Auto document feeder (ADF) input capacity50 sheets
Custom media width76.2 - 215.9 mm
Maximum print size216 x 356 mm
Custom media length116 - 355.6 mm
Paper tray media typesPlain paper, Recycled paper, Thick paper, Thin paper
Non-ISO print media sizesExecutive (184 x 267mm), Letter (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
JIS B-series sizes (B0...B9)B5
Multi-purpose tray media typesBond paper, Envelopes, Glossy paper, Labels, Plain paper, Recycled paper, Thick paper, Thicker paper, Thin paper
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 163 g/m²
Paper tray media weight (imperial)16 - 43 lbs
Auto Document Feeder (ADF) media weight64 - 105 g/m²
Auto Document Feeder (ADF) media weight (imperial)16 - 28 lbs
Harmonized System (HS) code84433100
Weight and Dimensions IconWeight and Dimensions
Depth509 mm
Width410 mm
Height414 mm

Summary

Unpack and Check Components

Initial Setup Steps

Install Drum Unit and Toner Cartridges

Remove packing materials and re-install drum unit and toner cartridge assemblies by removing tape, locks, and orange parts.

Load Paper

Load paper into the paper tray, adjusting paper guides and not exceeding the fill mark.

Connect Power and Turn On

Connect the power cord and turn on the machine.

Select Language

Select the desired language for the machine interface, with separate instructions for LCD and touchscreen models.

Connect Telephone Line

Connect the telephone line cord for MFC models if fax functionality is to be used.

Configure Fax Settings

Set the date and time, and configure the Station ID with fax/telephone number and name for MFC models.

Connect to Your Machine

Connect Computer

Instructions to connect to a computer, guiding the user to step 8 for installation.

Connect Mobile Device

Instructions to connect to a mobile device, guiding the user to step 9 for setup.

Computer Connection & Setup

Install Software

Install the full driver and software package from the disc or online for Windows and Mac.

Network User Security

Best practice to configure a unique admin password for network devices and change the default 'initpass'.

Troubleshoot Connection

Steps to check when connection fails, including restarting devices and checking cables.

Wireless Setup and Mobile Printing

Alternative Wireless Setup

Guide for setting up wireless connection using SSID and Network Key for LCD and touchscreen models.

Print and Scan with Mobile Device

Instructions for printing and scanning using mobile devices via AirPrint, Mopria, or Brother iPrint&Scan app.

Related product manuals