Use this function to create a label that can be
used to identify various components on panels.
Using the Faceplate function ensures that each
block of text is evenly spaced on a single label.
• Faceplate length: 1.2" to 12.0" (30 mm to 300 mm)
Default: 2.0" (50 mm)
NOTE
• Faceplate and Serialize functions can be
combined after entering text and following the
Serialize steps.
Use this function to create multiple labels with a
number or letter automatically incremented on
each label.
This serializing function can also be used with the
Cable Wrap, Cable Flag, or Faceplate templates
to save time entering and printing a series of
labels.
• You can Serialize numbers from 01 - 50.
Faceplate
/ (6HOHFWDIDFHSODWHOHQJWK)
((QWHUWH[W)
DATA 2
DATA 1
Serialize
((QWHUWH[W) /
(6HOHFWDFKDUDFWHUWREHLQFUHPHQWHG)
[Serialize:]
// -
To Next Page
Loading...
