Brother P-touch Pro PT-H111 - Basic Usage; Entering Text

BASIC USAGE
You can enter a maximum of 80 characters and
spaces for a text label.
To cancel any operation, press .
X Switching Upper Case / Lower Case
X Creating Two-Line Tapes
Move the cursor to where you want to start the
next line and press . Use either 0.35" (9 mm)
or 0.47" (12 mm) tape for two-line printing.
NOTE
The return symbol ( ) appears when you press
.
X Entering Tabs
The tab symbol appears when you insert a tab
in the text.
X Changing Tab Length
• To return to the default tab length, press the Space
key.
• Please note: the default length varies based on
your tape size.
X Cursor Keys
To move to the end of your text:
+
To move to the beginning of your text:
+
X Entering Accented Characters
• Refer to the Accented Characters table in this
guide.
• The order of accented characters varies based
on the language you selected.
Entering Text
2
Upper case
( ON)
Lower case
( OFF)
Line 1 The image
Line 2
Caps Caps
/ [Tab]
/ [Tab Length]
/ [Auto / 0.0"-4.0"
(0-100mm)]
- / /