To Next PageTo Next PageWhy is my Brother Label Maker not printing correctly?
If your Brother Label Maker isn't printing or the printed characters are blurred, first ensure that the tape cassette has been inserted correctly. If the tape cassette is empty, replace it with a new one. Also, verify that the tape compartment cover is closed properly.
How to fix Brother Label Maker when printed characters are not formed properly?
If the printed characters from your Brother Label Maker are not formed properly, the alkaline batteries you're using may be low. Try using the AC adapter or replace the batteries with new ones.
What to do if striped tape appears on my Brother Label Maker?
If you find striped tape appearing from your Brother Label Maker, it means you've reached the end of the tape. Replace the tape cassette with a new one.
What to do if my Brother P-Touch PT-1950 has locked up?
If your Brother Label Maker has locked up (meaning nothing happens when you press a key), turn the machine off. Then, while holding down the 'c' and 'R' buttons, turn the machine back on. Please note that this will erase the text and formats in the display, as well as all text files stored in the memory.
Why is the display blank on my Brother Label Maker?
If your Brother Label Maker display is blank after turning it on, make sure the AC adapter is correctly connected. If you're using alkaline batteries, check that they are properly inserted and replace them with new ones if they are low.
Why are my saved files missing from my Brother Label Maker?
If the text files stored in your Brother Label Maker's memory are no longer there, it may be due to low batteries. Try replacing them with new ones.
General| Brand | Brother |
|---|---|
| Model | P-Touch PT-1950 |
| Category | Label Maker |
| Language | English |
Overview of the P-touch unit's top and bottom views, identifying key components.
Procedure for storing text files in the machine's memory.
How to recall previously stored text files from memory.
