What to do if Brother Pocketjet PJ-622 Printer paper does not feed?
If your Brother printer's motor runs but the paper doesn't feed, ensure the release cover is completely closed and that you're using genuine Brother thermal paper. Note that heavy paper might not pass through the printer. If the issue persists, the printer may be damaged, and you should contact your reseller or Brother Customer Service.
Why nothing appears on paper from Brother Printer?
If the paper goes through your Brother printer but nothing prints, first, verify you're using genuine Brother thermal paper loaded correctly with the coated side facing down. If the issue continues, check the print density setting.
How to improve print quality on Brother Printer?
If your Brother printer's print quality is poor, and the image is either too light or too dark, adjust the density setting using the printer driver. Also, ensure that you are using genuine Brother thermal paper.
What to do if Brother Pocketjet PJ-622 doesn't print proper characters?
If the printed page from your Brother printer doesn't show the correct characters, ensure you've selected the right character set (font) in the computer program. Change the character set if needed, or try using a different font in the document.
Why is Brother Printer image out of alignment?
If the printed image from your Brother printer is out of alignment, ensure you're using genuine Brother thermal paper and that it's loaded correctly. Also, check if the platen roller is dirty; if so, clean it.
How to adjust side margins on Brother Pocketjet PJ-622 Printer?
If the side margins are incorrect on your Brother printer, verify that the correct margins are set in both the PJ-600 Series Utility and the computer program. Adjust the left margin as needed. Ensure the computer program, printer, and printer driver match the paper size loaded. If the computer program or printer driver is set to a different paper width, the image won't print in the correct horizontal position; adjust the settings accordingly.
How to fix incorrect top margin on Brother Pocketjet PJ-622?
If the top margin is incorrect on your Brother printer, verify that the correct margins have been set in the PJ-600 Series Utility and the computer program. Adjust the top and bottom margins as needed. Make sure you are gently inserting the paper into the paper input slot, without forcing it.
Why does Brother Printer use wrong number of sheets?
If your Brother printer uses more or fewer sheets than expected for a page, ensure that the computer program, printer, and printer driver settings match the paper size loaded in the printer. If the computer program or printer driver is set to print legal-size paper while you're using letter-size paper, the image will require two sheets. Adjust settings in the computer program or printer driver's dialog box as needed, or reduce the print image size to fit on a letter-size page. Note that the DATA indicator remains lit in green if data is still in the printer after the page has completed printing.
Why is Brother Pocketjet PJ-622 image compressed and stretched?
If the image from your Brother printer is compressed and stretched, make sure the release cover wasn't left open during printing; close it completely if it was. Check if the paper is slipping; if so, ensure the platen roller is clean. Also, use genuine Brother thermal paper and ensure it's not wrinkled before loading.
Why does Brother Pocketjet PJ-622 Printer print random dots?
If your Brother printer is printing random dots, check the printer driver to ensure it's set correctly. Also, make sure the USB cable is firmly and correctly connected; try using another USB cable to rule out a faulty connection.
Provides step-by-step instructions for installing the Ni-MH rechargeable battery.
Explains the procedure for removing and charging the Ni-MH rechargeable battery.
Guides users through the process of installing the rechargeable Li-ion battery.
Explains how to charge the rechargeable Li-ion battery, both installed and removed.
Guides users through the process of installing the printer driver for Windows and Mac OS.
Details the process for uninstalling the printer driver on Windows and Mac OS.
Explains the methods for connecting the printer to a computer via USB and Bluetooth.
Provides instructions for establishing a Bluetooth connection for PJ-662/663 models on Windows and Mac OS.
Outlines the standard procedure for printing a document using the printer.
Covers settings for paper type, form feed modes, and extra feed options.
Provides step-by-step instructions for clearing a paper jam from the printer.
Introduces the PJ-600 Series Utility and provides installation instructions for Windows and Mac OS.
Details the process for uninstalling the PJ-600 Series Utility from Windows and Mac OS.
Explains how to start and use the PJ-600 Series Utility software for printer configuration.
Lists common paper-related problems and their solutions, such as jams and blank prints.
Details problems related to print alignment, quality, compression, and margins.
Addresses issues where the printer does not print, including data reception and missing CR/LF signals.
Discusses scenarios where pages are printed incompletely or incorrectly.
General| Type | Mobile Printer |
|---|---|
| Connectivity | USB, Bluetooth |
| Print Technology | Thermal |
| Print Speed | 8 ppm (A4) |
| Media Size | A4, Letter, Legal, A5 |
| Power Source | AC Adapter, Battery |
To Next Page